List of products by manufacturer Ulfberth

per page
Showing 1 - 48 of 76 items
  • $ 45.41 In Stock
    Show available variants

    Shipping today

    Functional medieval shield made in various sizes. With riveted support and covered in leather to be grabbed. This type of shield was frequently used with one-handed swords during the High Middle Ages until the Renaissance. Talls S: 23 cms.Size M: 30 cms.Size L: 38 cms.

    $ 45.41
    In Stock: 4 un.
  • $ 24.08 In Stock

    Shipping today

    English spear tip of the VI-VII centuries used by Vikings and Celts. Made of steel.

    $ 24.08
    In Stock: 3 un.
  • $ 19.35 In Stock

    Shipping today

    Hand-forged, functional spearhead to fit a handle of approximately 30mm.

    $ 19.35
    In Stock: 3 un.
  • $ 24.08 In Stock

    Shipping today

    Spearhead with functional wings forged by hand. The tip is rounded to avoid combat damage. It can be adjusted to a handle of approximately 30 mm.

    $ 24.08
    In Stock: 3 un.
  • $ 56.33 In Stock
    Show available variants

    Shipping today

    Functional cervellera made of steel with a thickness of 2 mm. On the sides and in the back comes with holes to add chainmail rings. It is an economic helmet for beginners. It is adjusted to the head by leather straps. In face-to-face fighting this type of helmet was preferred since it did not affect the vision of combat and breathing.

    $ 56.33
    In Stock: 2 un.
  • $ 114.57 In Stock
    Show available variants

    Shipping today

    Historic Spangenhelm helmet for battle. Made of 2mm steel. thick. Nasal protection of 3 mm. Includes leather closure with brass buckle to hold on the chin.

    $ 114.57
    In Stock: 2 un.
  • $ 90.91 In Stock
    Show available variants

    Shipping today

    Functional Wenceslaus nasal helmet for battle of the 10th century. The original is located in Prague. Made of 2mm steel. thick. Nasal protection of 3 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.

    $ 90.91
    In Stock: 2 un.
  • $ 24.08 In Stock

    Shipping today

    Hand-forged, functional spearhead to fit a handle of approximately 42mm.

    $ 24.08
    In Stock: 2 un.
  • $ 132.77 In Stock

    Shipping today

    falchion functional used in the Middle Ages, you may also be referred Falchion, translated into Castilian as Falcata. Made in Germany by Ulfberth®. Handmade sheet EN45 steel with a hardness of HRC 48-50º. Corrugated sheet with rounded edges and blunt. It includes matching leather sheath. Wood grip covered in leather.

    $ 132.77
    In Stock: 1 un.
  • $ 26.98 In Stock

    Shipping today

    Medieval bell made of hand-forged iron. aproximada.- height 12 cms.

    $ 26.98
    In Stock: 1 un.
  • $ 38.58 In Stock

    Shipping today

    Medieval chandelier to put candle. Made of hand-forged iron. aproxidada.- Height 74 cms.

    $ 38.58
    In Stock: 1 un.
  • $ 96.37 In Stock
    Show available variants

    Shipping today

    functional medieval Bacinete (2 mm. thick) of the fourteenth century without viewfinder. It includes interior padding. It comes with brass rivets. P>M.- size Circumference: 61 cm <./ Li>L.- size Circumference: 63 cm <./ Li>

    $ 96.37
    In Stock: 1 un.
  • $ 153.48 In Stock

    Shipping today

    functional X century Viking sword hand-crafted by the ULFBERTH® brand. Blade made in EN45 carbon tempered steel with a hardness of 48-50 HRC. full tang with riveting knob and handle lined in leather. It includes wooden sheath covered in leather.

    $ 153.48
    In Stock: 1 un.
  • $ 170.46 In Stock
    Show available variants

    Shipping today

    Lorraine Hamata Roman legionary made with 8 mm steel rings. diameter. The shoulder cover is edged.

    $ 170.46
    In Stock: 1 un.
  • $ 161.24 In Stock

    Shipping today

    Medieval armor plates articulated arms for protection. It includes belts with buckles for fixing the arm. It also comes prepared to set a gambeson.

    $ 161.24
    In Stock: 1 un.
  • $ 43.59 In Stock

    Shipping today

    Decorative testicular dag with leather cover. The blade is double-edged made of high-carbon steel and the handle is made of wood./ P>

    $ 43.59
    In Stock: 1 un.
  • $ 39.95 In Stock

    Shipping today

    The Viking greba is composed of 7 steel strips of 2 mm. riveted to 3 hard leather straps. The straps are adjusted by brass buckles.

    $ 39.95
    In Stock: 1 un.
  • $ 140.05 In Stock
    Show available variants

    Shipping today

    Medieval helmet Coventry Sallet of the fifteenth century. It is a replica of the original found in the Herbert Art Gallery Museum in Coventry, England. Handmade in 2 mm steel. of thickness and prepared for Full Contact and recreation. It comes riveted and soldier. Includes adjustable padded lining, leather strap and metal buckle.

    $ 140.05
    In Stock: 1 un.
  • $ 19.35 In Stock

    Shipping today

    This medieval knife is hand-forged in carbon steel. Includes leather sheath. p>

    $ 19.35
    In Stock: 1 un.
  • $ 136.41 In Stock
    Show available variants

    Shipping today

    Helmet Crossed Spangenhelm 12th century AD with frontal visor. Handmade in 2 mm steel. thick. It comes riveted. Includes padded lining.

    $ 136.41
    In Stock: 1 un.
  • $ 21.51 In Stock

    Shipping today

    Functional hand-forged spearhead to adjust to a handle of approximately 28mm. p>

    $ 21.51
    In Stock: 1 un.
  • $ 99.92 In Stock

    Norman sword from a functional hand X century made in Germany by Ulfberth®. corrugated sheet steel hand-forged and well tempered with a hardness of 48-50 HRC. The full tang is riveted to the pommel. The handle is covered in leather. blunt edges and rounded tip. NO includes sheath.

    $ 99.92
    In Stock: 0 un.
  • $ 196.14 In Stock

    Roman Germanic Spatha functional Ulfberth® manufactured in Germany. Corrugated sheet carbon steel hand-forged EN 45 well tempered with a hardness of 48 HRC. The full tang is riveted to the pommel. The handle is wood and brass. blunt edges and rounded tip. SI includes matching wooden sheath covered in leather with brazed endings ..

    $ 196.14
    In Stock: 0 un.
  • $ 132.77 In Stock

    Functional medieval sword hand. Handmade EN45 steel with a hardness of HRC 48-50º. Corrugated sheet with rounded edges and blunt. With handle disk and manufactured in Germany by Ulfberth®. Wood grip covered in leather and reinforced at its ends by two steel rings. It includes matching leather sheath.

    $ 132.77
    In Stock: 0 un.
  • $ 153.48 In Stock

    Functional Viking shield made of wood with steel fittings. Strong grip on its back with padded, self-adjusting straps.

    $ 153.48
    In Stock: 0 un.
  • $ 118.21 In Stock

    one size fits medieval breastplate made of steel with a thickness of 1.6 mm. The breastplate is oval in the abdominal area and closed in the back with leather straps. It is decorated with leather straps riveted in the arms and neck.

    $ 118.21
    In Stock: 0 un.
  • $ 145.42 In Stock

    Roman helmet Spangenhelm that appeared in Egypt and is dated in the first half of the fourth century after Christ. Made with steel plates of 1.6 mm. thick joined with rivets. The interior comes with fabric lining and straps and buckle to fit the neck.

    $ 145.42
    In Stock: 0 un.
  • $ 38.58 In Stock

    medieval hand-forged candlestick patterns following the manufacture of the time.

    $ 38.58
    In Stock: 0 un.
  • $ 56.33 In Stock
    Show available variants

    Functional cervellera made of steel with a thickness of 2 mm. On the sides and in the back comes with holes to add chainmail rings. It is an economic helmet for beginners. It is adjusted to the head by leather straps. In face-to-face fighting this type of helmet was preferred since it did not affect the vision of combat and breathing.

    $ 56.33
    In Stock: 0 un.
  • $ 135.41 In Stock

    articulated medieval armor for the legs and knees. Made of mild steel of 1.8 mm. thick. It is suitable for combat and recreation. It includes leather straps and buckles to fix the pieces along the leg. It includes the couple. P>

    $ 135.41
    In Stock: 0 un.
  • $ 120.03 In Stock

    Replica of craticula, grill or Roman stove made of wrought iron and riveted by hand. The opening of the center is designed to locate the pan or cooking pot. Ideal for Roman or even medieval recreations.

    $ 120.03
    In Stock: 0 un.
  • $ 153.48 In Stock
    Show available variants

    Houndskull bacine with removable articulated visor that covers the entire face. Handmade in 2mm steel. thick. It comes riveted and soldier. It has some brass rivets if we want to put a protection, Aventail, for the chest and shoulders. Includes padded lining. Until 1420 it was the most popular helmet among the warrior knights of the time. This helmet is...

    $ 153.48
    In Stock: 0 un.
  • $ 132.77 In Stock
    Show available variants

    Kettle medieval helmet from the 14th century. It was usually used by the infantry troop. Made of 2mm steel. thick. Includes leather closure with brass buckle to hold on the chin.

    $ 132.77
    In Stock: 0 un.
  • $ 132.77 In Stock
    Show available variants

    Medieval helmet Kettle round of the fourteenth century. It was usually used by the infantry troop. Made of 2mm steel. thick. Includes leather closure with brass buckle to hold on the chin.

    $ 132.77
    In Stock: 0 un.
  • $ 145.51 In Stock
    Show available variants

    Viking helmet Spangenhelm for battle. Made of 2mm steel. thick. Nasal protection of 4 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.

    $ 145.51
    In Stock: 0 un.
  • $ 109.02 In Stock

    Replica of craticula, grill or Roman stove made of wrought iron and riveted by hand. With 2 apertures2 to locate pots or pans for cooking./ P>Ideal for Roman or even medieval recreations.

    $ 109.02
    In Stock: 0 un.
  • $ 32.78 In Stock

    The Viking bracelet is made up of five steel strips and riveted to 2 hard leather straps. The straps are adjusted by brass buckles. The thickness of the bracelets is 2 mm.

    $ 32.78
    In Stock: 0 un.
  • $ 214.91 In Stock

    Grecian Corinthian helmet made of bronze without rivets. Includes padding. Circumference of 65 cms. One size. p>

    $ 214.91
    In Stock: 0 un.
  • $ 132.77 In Stock
    Show available variants

    Gothic functional headpiece year 1480. Includes visor with pin, chin strap and interior padding. Made of 2 mm steel. thick.

    $ 132.77
    In Stock: 0 un.
  • $ 127.31 In Stock
    Show available variants

    German functional celada year 1480. Includes visor with pin, chin strap and interior padding. Made of 2 mm steel. thick. p>

    $ 127.31
    In Stock: 0 un.
  • $ 114.57 In Stock
    Show available variants

    Viking helmet Spangenhelm for battle. Made of 2mm steel. thick. Nasal protection of 3.2 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.

    $ 114.57
    In Stock: 0 un.
  • $ 132.77 In Stock
    Show available variants

    Italian barbuta of the year 1440 corresponding to the Anvant armor of the KLelvingrove museum in Glasgow. Handmade in 2mm steel. thick. It comes riveted and soldier. It has some brass rivets if we want to put a protection, Aventail, for the chest and shoulders. Includes padded lining.

    $ 132.77
    In Stock: 0 un.
  • $ 136.41 In Stock
    Show available variants

    Medieval helmet Normal Spangen year 1180 AD with frontal visor. Handmade in 1.6 mm steel. to 3.2 mm. thick. It comes riveted and soldier. Includes padded lining. p>

    $ 136.41
    In Stock: 0 un.
  • $ 32.68 In Stock

    Protection of neck battle-ready. The protection for the neck can be attached to the chain mail or other type of reinforcement to reinforce it. The inner diameter of the rings is 6 mm.

    $ 32.68
    In Stock: 0 un.
  • $ 45.41 In Stock
    Show available variants

    Functional medieval shield made in various sizes. With riveted support and covered in leather to be grabbed. This type of shield was frequently used with one-handed swords during the High Middle Ages until the Renaissance. Size M: 30 cms.Size L: 38 cms.

    $ 45.41
    In Stock: 0 un.
  • $ 100.01 In Stock
    Show available variants

    Functional Italian nasal helmet for battle of the XII century. Introduced by the Normans who went from Sicily to southern Italy. Made of 2mm steel. thick. Nasal protection of 4 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.

    $ 100.01
    In Stock: 0 un.
  • $ 145.51 In Stock
    Show available variants

    Functional medieval celada, year 1490, with folding visor type bellows. Made of 2mm steel. of thickness and visor of 1,6 mm. Nasal protection of 4 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.

    $ 145.51
    In Stock: 0 un.
  • $ 145.51 In Stock
    Show available variants

    Medieval helmet functional Spangen with guard-ears and Aventail. Based on the Viking helmets found from the 9th century AD. All parts are welded and riveted. Thickness: 2mm and nose of 3 mm. Includes adjustable leather lining and straps with chin buckle.

    $ 145.51
    In Stock: 0 un.
Showing 1 - 48 of 76 items