The shield is the oldest known defensive and attack weapon. An authentic protection to protect against enemy attacks. The shields are known from 3000 years before Christ.
The elbows or elbows are a part of the armors that serve as protection for the elbows. They hook between the protections of the arm and the forearm with which the assembly must be articulated. There is a complete piece that covers all those parts of the body called Jackchains. p>
We sell dimensions mesh cheap made in iron or aluminum. A metal shield formed by rings of wrought iron or steel. Also loriga. Part of armor with swords, daggers, axes, swords
The gauntlets or medieval mittens are the metal gloves, the parts of armour to protect fingers and hands during battle. During the XIth and XIIth century, the gautlets consisted of a chainmail sack; in France, people wore them with a hand opening to easily remove the fist. Then leather gloves were made, with an iron roundel on the back and a chainmail buttoned over the sleeve. From the early XVth century, the metal gauntlet was detached from the leather glove, allowing the contestant to wear a split-finger gauntlet on the left and the mitton on the right hand. This depended if he had to fight with different weapons. In the XIVth century, separated fingers gautelets appear; they consisted of several pieces of steel, accommodated to the divisions of the hand.
The shoulder pads are that part of the armour that does not receive much attention, but in the medieval days, warfare days, they saved the arms of more than one warrior. As the whole armor, shoulder pads were made at the beginning, with animal leather, chain mail and some piece of iron. A curious fact to note is that many of the warriors wore only one pad, mostly on the left, so that the right arm did not lose the mobility needed to handle the sword. This is why many armours were are asymmetrical. With the idea to also protect the right shoulder, the craftsmen began making articulated shoulder pads, incorporating both leather for flexibility, as iron to receive the blows.
The executioner or almofar is a metal mesh that is placed below the hull of combat and covers the neck and shoulders. Replaced in his day to the bonnet mesh that already is only used by the poorer classes. The almófar attached to the helmet, usually via small staples known as vervelles.
D-rings for making or repairing your own armors or executioners.
Medieval chasms usual in the fourteenth and fifteenth centuries in Italy.
Leg protectors oscarcelones of the legs of the metallic armor.
Bracers or panoplies are the part of the armor that covers the forearm.
The mittens are the part of the armor that covers the wrists and hands./ p>
Viking armor in adjustable brown leather with 4 buckles located on the back. Available in several sizes. p>
brown leather medieval armor. It includes front buckles and is adjustable sideways. It is suitable for measuringBreast maximum 105 cm.
Scarlet Adam to hang to the belt using leather straps. It is made of polished steel.
German halberd XI century. A enastada weapon wooden shaft about two meters in length and has at its head a spearhead weapons and upper breast, a cross-shaped blade ax blade on one side, and a breastplate punctured or engage smaller by its opposite.
Functional medieval barbuta made of 1.6 mm steel. Includes leather chin strap. The barbuta served as shelter for the head and had as element the gola that defended the neck in front and the cover that defended the neck from behind.
Medieval padded gorget with buckle. Made of 60% cotton and 40% polyester. One size.
Medieval chainmail, rather small. Manufactured with riveted duce steel rings. Contour chest: 70-95 cms.Ring diameter: 9 mm. li>
Authentic medieval chainmail, made with long sleeves, made of galvanized carbon steel with 9mm rings. p>
Medieval shoulders made of mild steel and polished leather trimmings. It includes only the pair.
Gola in plain fabric, also known as Mantle Obispo. Gola protects the shoulders. P>
medieval helmet with shield and belt adjustment. Perimeter: 57-58 cms.
Gola, the mantle of Bishop-finished leather and buckle neck.
Replica of the Viking helmet that became famous during the VIII and IX centuries. Manufactured completely in steel with a thickness of 2mm. The mask and nasal protection are riveted to the helmet. It is adjusted to the head by leather straps. It is a robust 100% battle-ready helmet that offers good protection during medieval re-enactments. To complement...
Medieval padded gorget with laces. Made of 60% cotton and 40% polyester. One size.
Escarcela Balthasar to hang to the belt using leather straps. It is made of polished steel.
Leather gloves with over protection steel chainmail. One size.
Articulated steel gauntlets 1 mm. thick. Glove leather interior.
Bacinete with medieval viewer. Made of mild steel 1mm. - 18 ga. thick. Recommended for recreationists but not to fight.Size M: Perimeter, 60 cms <./ Li>Size L: Circumference 65 cms <./ Li>
Protector for Roman Gladiator articulated arm made of steel sheets. It includes buckles and leather interior to protect the arm.
Pair of gloves chainmail rings coated with 9 mm. Made of galvanized steel.
Articulated arms Gothic medieval armor. It Includes 2 arms. Made of polished steel 1mm. thick with rolled edges. It includes leather straps with buckles to adjust. P>
Functional cervellera made of steel with a thickness of 2 mm. On the sides and in the back comes with holes to add chainmail rings. It is an economic helmet for beginners. It is adjusted to the head by leather straps. In face-to-face fighting this type of helmet was preferred since it did not affect the vision of combat and breathing.
Historic Spangenhelm helmet for battle. Made of 2mm steel. thick. Nasal protection of 3 mm. Includes leather closure with brass buckle to hold on the chin.
Functional Wenceslaus nasal helmet for battle of the 10th century. The original is located in Prague. Made of 2mm steel. thick. Nasal protection of 3 mm. Includes leather closure with brass buckle to hold on the chin and interior padding.
Full Greek muscled armor made of brass. On the sides it comes with leather straps to adjust the armor. The armor is available only in size L.
Hoplite warriors' stems made of brass and lined with leather for comfort. The total height of the greaves is 52 cms. and the ankle height at the knee of 39 cms./ p>
Georg medieval gorget made of steel and adjustable by buckles and leather straps.
Peto smoothto armorwithout engravings.It is not practical to persons. Dickey is part of medieval armor and its mission is critical because it protects Fighter chest. P>
Engraved shield with castle in the center and alredodor golden studs. Made by hand in steel.
Lorica segmentata manufactured in 18G steel with cast bronze details. The segmentata lorica is the name given to the armor worn by the Roman legionaries during their time of splendor (1st century BC-3rd century AD). The name comes from the Latin word for segmented, which refers to the division into metal plates of the armor.
Greaves made leather 3.5mm thickness by adjustable straps. Extra protection for the part from the ankle to the knee. It is done in black, dark brown, light brown and red. For other colors on request.
Greco-Roman Gregas made in thick fur with a total extent of 37 cms. high. Ability to perform in black, red, dark brown and light brown. Article I-crafted genuine leather and top quality.
Cota medieval mesh made of steel. Circumference rings 8 mm. Standard size.
Gladiator armor made of 3.5 mm leather. and adjustable by straps. Handmade with the best quality leather.
Greaves plated steel with self-adjustable straps. Made from 1.2mm steel. thick. Price per couple.
Guards of medieval warrior. Made of steel 1mm. thick. It includes the pair of pads, pushups and buckles for fastening to the frame.
Verdugo dimension of black mesh with mouthguard. Rings: 8 mm.Head Circumference: max. 63cm. Span>The rings are blackened to protect them from corrosion. It covers shoulders and has opening in the mouth with leather straps sewn on the sides.
Medieval shield made of latex wood color and with a diameter of 36 cms.
Roman legionary pads made of brown leather.
Jack medieval Chains. Protection of metal arms composed of 4 plates articulated rings. Made of mild steel polished 1mm. thick. They were used in the fifteenth century by laborers, archers and archers.
medieval armor black leather. It includes front buckles and is adjustable sideways. It is suitable for measuringBreast maximum 105 cm.
Viking shield functional, imitation wood, made of high quality latex.
Set consisting of Peto and Back of Medieval King. Functional pieces made of polished steel 1mm (19ga) thick. They include leather straps and buckles.
Authentic medieval chain mail, made with black carbon steel sleeve with 8 mm rings.
Bag of approximately 1460 galvanized steel rings including rivets. Diameter: 9 mm. Ring thickness: 1.5 mm. Ideal for repair or creation of chain mail.
Bag approximately 5500 rings coated carbon steel zinc. Diameter: 9 mm. Ring thickness: 1.6 mm. Ideal for repair or creation of chain mail.
X century Viking helmet made of steel functional 2mm (14G). This replica is based on Viking helmets found in Norway. Includes mail attached to the hull. The interior is lined with leather and has fastening strap.
German bacinete functional, battle-ready, with steel thickness 2 mm. Includes removable viewer. Handmade, riveted and welded.